Ersa EASY ARM 1
Article No.: 0CA10-001
Highly efficient and compact fume extraction unit for single workplaces
Solder fume extraction of a new generation - silent and effective as never before!
- Continuously settable extraction power
- Effective 3-stage filter system - 99,95% filter degree
- 100 m³/h air flow per extraction arm
- Optical and acoustical reminder signal for filter exchange
- High performance filter materials, filters fit to both systems of the EASY ARM series
- Interface to connect to an i-CON soldering station or a standby-switch
-
Flexible system of extraction arms and nozzles allows individual setup for each workplace
-
Small footprint
Questions about the product? Please find your personal contact here.
Technical Data
Application
- filtration of unhealthy solder fume from the abient breathing air
- 3-stage filtration system:
prefilter: absorbs larger particles and dust
combined filter: separates micro particles
activated carbon: absorbs toxical gas molecules - flux deposit onto the electronic assemblies is avoided
Options
Ersa recommends the following accessories:
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-1001
Article No.: 0CA10-1001
combined filter H13
for EASY ARM 1 & EASY ARM 2
2-combined filter with
particle filter H13,
gas filter activated carbon
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-1002/04
Article No.: 0CA10-1002/04
pre-filter F7
for EASY ARM 1 & EASY ARM 2
particle filter F7
packing unit: 4 pcs
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-4003
Article No.: 0CA10-4003
extraction arm Omniflex
for EASY ARM 1 & EASY ARM 2
direct mounting on the unit
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-4002
Article No.: 0CA10-4002
extraction arm Highflex
for EASY ARM 1 & EASY ARM 2
direct mounting on the unit
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-4001
Article No.: 0CA10-4001
extraction arm Highflex with hinge
for EASY ARM 1 & EASY ARM 2
table mounting up to 85 mm thickness
incl. connection hose 0CA10-2002
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-4004
Article No.: 0CA10-4004
extraction arm Omniflex with hinge
for EASY ARM 1 & EASY ARM 2
table mounting up to 85 mm thickness
incl. connection hose 0CA10-2002
for EASY ARM 1 & EASY ARM 2
Article No.: 291405
Article No.: 291405
extraction arm Omniflex with hinge and table duct
for EASY ARM 1 & EASY ARM 2
incl. connection hose 0CA10-2002
for EASY ARM 1 & EASY ARM 2
Article No.: 290763
Article No.: 290763
extraction arm Highflex with hinge and table duct
for EASY ARM 1 & EASY ARM 2
incl. connection hose 0CA10-2002
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-2002
Article No.: 0CA10-2002
connecting hose
for EASY ARM 1 & EASY ARM 2
for:
- extraction arm with hinge Omniflex
- extraction arm with hinge Highflex
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-9006
Article No.: 0CA10-9006
nozzle coupling Omniflex
for EASY ARM 1 & EASY ARM 2
For Omniflex extraction arms in combination with nozzles 0CA10-5001, 0CA10-5004 and 0CA10-5005.
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-5001
Article No.: 0CA10-5001
extraction nozzle, metallic
for EASY ARM 1 & EASY ARM 2
fits to Highflex extraction arms.
for Omniflex extraction arms nozzle coupling 0CA10-9006
is required
diameter in mm: 60
antistatic (y/n): y
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-5005
Article No.: 0CA10-5005
extraction nozzle, plastic
for EASY ARM 1 & EASY ARM 2
fits to Highflex extraction arms.
for Omniflex extraction arms nozzle coupling 0CA10-9006
is required
diameter in mm: 60
antistatic (y/n): y
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-5002
Article No.: 0CA10-5002
extraction nozzle, round
for EASY ARM 1 & EASY ARM 2
fits to Highflex and Omniflex extraction arms.
diameter in mm: 60
antistatic (y/n): y
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-5003
Article No.: 0CA10-5003
extraction nozzle, rectangular
for EASY ARM 1 & EASY ARM 2
fits to Highflex and Omniflex extraction arms.
dimensions (W xH) in mm: 155 x 90
antistatic (y/n): y
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-5004
Article No.: 0CA10-5004
extraction nozzle Plus, transparent
for EASY ARM 1 & EASY ARM 2
fits to Highflex extraction arms.
for Omniflex extraction arms nozzle coupling 0CA10-9006
is required
dimensions (W xH) in mm: 230 x 85
antistatic (y/n): y
for EASY ARM 1
Article No.: 3CA10-9001
Article No.: 3CA10-9001
table clamp EASY ARM 1
for EASY ARM 1
for EASY ARM 1
for EASY ARM 1 & EASY ARM 2
Article No.: 0CA10-4005
Article No.: 0CA10-4005
table duct
for EASY ARM 1 & EASY ARM 2
To mount into a worktop (max. thickness 50 mm); drill Ø 75 mm.
For Omiflex extraction arm 0CA10-4003.
for EASY ARM 1 & EASY ARM 2
Article No.: 3CA10-2003
Article No.: 3CA10-2003
Interface-cable
for EASY ARM 1 & EASY ARM 2
Interface-cable to connect to:
- i-CON1 C,
- i-CON2 C,
- i-CON VARIO 2,
- i-CON VARIO 4
for EASY ARM 1 & EASY ARM 2
Article No.: 3CA10-2004
Article No.: 3CA10-2004
Standby-switch
for EASY ARM 1 & EASY ARM 2
Similar products
