i-CON 2

Artikel-Nr.: 0IC2000AIT
dual channel, electronically controlled soldering and desoldering station, 120 W

i-CON 2 with two i-TOOLS (0IC2000AIT)
i-CON 2 with two i-TOOLS (0IC2000AIT)
i-CON 2 with i-TOOL (0IC2000A)
i-CON 2 with i-TOOL and CHIP TOOL (0IC2000AC)
i-CON 2 with i-TOOL, X-TOOL and Vacuum unit CU100 (0IC2000AXT)
i-CON 2 C with i-TOOL and interface (IC2000A0C)
   
 
 

Professional soldering in the industry: flexible and powerful!

  • Soldering and desoldering station for simultaneous operation of two soldering tools

  • Intelligent power management - 120 W are split up dynamically between the connected tools

  • Easy operation - intuitive One-Touch push button and two large multifunctional displays

  • Six different soldering tools connectable
  • Available with interface to solder fume extraction unit, heating plate and PC

  • Antistatic design

Technical Data

Dimensions (W x D x H) in mm
150 x 175 x 105
Weight in kg
3,7
Antistatic Design (y/n)
y
Power Rating in W
120
Nominal voltage in V AC
230
Secondary voltage in V
24
Temperature range in °C
150-450
Digital display (y/n)
y
Test symbol
CE, VDE

Application

Applications for i-CON 2

The i-CON 2 is suitable for all SMT und PTH soldering tasks in electronic production, rework and R&D.

The attachable tools allow a very flexible usage of the station depending on the current demands.

 

The field of application reaches from the smallest SMD chips (0201) to standard SMD components including high pin count components (PLCC 84) and high mass solder joints in PTH technolgy including desoldering with solder removal.

PTH and SMD soldering, from fine to energy demanding applications
PTH desoldering with solder removal
SMD desoldering, PLCC, QFP, SO, SOIC, MELF, chips down to 0201
 

If you have application questions, please contact our application experts.

Connectable tools

Connectable tools

Further accessories can be found in the Ersa Shop.

in addition

Further accessories can be found in the Ersa Shop.

Available versions

The following versions or modules are available:

i-CON 2 with i-TOOL
i-CON 2 with i-TOOL

Article No.: 0IC2000A
i-CON 2 with i-TOOL and CHIP TOOL
i-CON 2 with i-TOOL and CHIP TOOL

Article No.: 0IC2000AC
i-CON 2 with two i-TOOLS
i-CON 2 with two i-TOOLS

Article No.: 0IC2000AIT
i-CON 2 with i-TOOL, X-TOOL and vacuum unit CU100
i-CON 2 with i-TOOL, X-TOOL and vacuum unit CU100

Article No.: 0IC2000AXT
vacuum unit CU 100 with X-TOOL
vacuum unit CU 100 with X-TOOL

Ergänzungsoption

Article No.: 0CU100A
i-CON 2 C with i-TOOL and interface
i-CON 2 C with i-TOOL and interface

Article No.: 0IC2000A0C
control unit i-CON 2 without Tool
control unit i-CON 2 without Tool

Article No.: 0IC203A
control unit i-CON 2 C without Tool, with interface
control unit i-CON 2 C without Tool, with interface

Article No.: 0IC203A0C
 

Downloads