Plymouth, WI - January 2014 - Kurtz Ersa North America, a leading supplier of electronics production equipment, announces that it will exhibit the i-CON Series Solder Stations at the SMTA Carolinas Expo & Tech Forum, scheduled to take place Thursday, January 23, 2014 at the Double Tree Raleigh Brownstone - University in Raleigh, NC.
Today's soldering operators are faced with ever-increasing challenges, including continued miniaturization and densely packed PCBs, high thermal mass solder joints as well as the general problems caused by the higher temperature by lead- free applications. Simply put, such difficulties can result in decreased profits due to a decrease in touch-up productivity, an increase in PCB scrap rate and an increase in soldering tip consumption. Ersa accepted these challenges when it introduced the i-CON C family of intelligent soldering stations. Designed for controlling or communicating (hence the "C") with an auxiliary Ersa product, i-CON C has a serial port which can connect to the various supporting workbench systems.
The i-CON C is available as an i-CON 1 C with one i-Tool solder iron or as the i-CON 2 C with one i-Tool iron and one additional soldering or de-soldering tool.
For more information about Kurtz Ersa North America, visit www.ersa.com.
Ersa Kurtz North America Inc. | 1779 Pilgrim Road | Plymouth, WI 53073 | USA Phone: + 1 920 893 1779 | Fax: + 1 920 893 1562 | e-mail: Ernie.Grice@kurtzersa.com | Web: www.ersa.com
German Headquarters: Ersa GmbH |Leonhard-Str. 24 |97877 Wertheim| Tel. +49 9342/800-0 |e-mail: firstname.lastname@example.org| Web: www.ersa.de