HR 500
Article No.: 0HR500
Budget oriented: flexible desoldering, placement and soldering of SMT components
Rework of electronic standard modules
Technical Highlights:
- 900 W Hybrid high-performance heating element
- Full-area 1,600 W IR bottom heater
- High-resolution cameras for placement and process monitoring
- Ergonomically optimal system operation
- Modern, user-friendly operating software
Technical Data
Application
Automatic repair process:
Desoldering, placement and soldering of all types of surface mounted devices (SMD): BGA, metallic BGA, CGA, BGA socket, QFP, PLCC, MLF and miniature components with an edge length of up to 1 x 1 mm.
Options
Ersa recommends the following accessories:
To observe reflow processes
Article No.: 0HR510
Article No.: 0HR510
Reflow Process Camera
To observe reflow processes
K type for the second measuring channel
Article No.: 0IR6500-37
Article No.: 0IR6500-37
AccuTC Sensor without fixture
K type for the second measuring channel
Spare sensor or second sensor for temperature control of temperature-sensitive components in the environment of the repair solder joint; sensor diameter approx. 0.5 mm.
K type, for the second measuring channel
Article No.: 0HR645
Article No.: 0HR645
AccuTC 2.0 Thermocouple
K type, for the second measuring channel
The alternative to the AccuTC for measures at Hybrid Rework Systems with big air volumes and for measures at high-mass plates; sensor diameter approx. 2 mm.
K type, for the second measuring channel
Article No.: 0IR4510-02
Article No.: 0IR4510-02
Temperature Sensor Cord
K type, for the second measuring channel
Sensor to observe the plate bottom side or for mounting at temperature-sensitive components. The sensor can be stuck with Kapton tape; sensor diameter approx. 0.3 mm.
suitable for AccuTC and AccuTC 2.0
Article No.: 0HR640
Article No.: 0HR640
TE Holder for HR 500
suitable for AccuTC and AccuTC 2.0
Hinged bracket with four pivots for easy and secure positioning of the AccuTC temperature sensor on the plate; you can use the holder with the other Ersa Rework Systems, too.
Additional products
Available Versions
The following product versions or modules are available:
Article No.: 0HR500
HR 500 Hybrid Rework System
Hybrid Rework System HR 500. Figure shows accessory Reflow Process Camera (0HR510), not included in delivery.