HR 600 XL
Article No.: 0HR600XL
Big and precise: automatic repair of complex assemblies up to 625 x 625 mm
Big board rework - big, unique, automatic, hot, smart
The rework solution for large and heavy assemblies:
- Highly efficient 800 W hybrid heating head, (optional 2,000 W)
- Large-area IR Matrix bottom heater with 25 single heating elements (600 W each)
- Process observation with up to 8 thermocouples
- Automatic and precise component alignment with the help of machine vision
- Highly accurate, motor-driven axis system
for component placement (+/- 0.025 mm) - User independent, reproducible repair results guaranteed
- Process control and documentation via the operator software HRSoft 2
- Fully automatic or semiautomatic operation
- Suitable for the use of the Dip&Print Station
BIG-BOARD-REWORK Landingpage:
Preserve added value from your electronic production with sustainable processes.
You have questions about the product? Please find your personal contact here.
Technical Data
Application
Automatic repair process:
Rework especially on large board applications up tp 625 x 625 mm (24.5 x 24.5 inch)
Desoldering, placement and soldering of all types of surface mounted devices (SMD): BGA, metallic BGA, CGA, BGA socket, QFP, PLCC, MLF and miniature components with an edge length of up to 0.5 x 0.5 mm.
Questions to your applications will be answered by our Ersa Experts.
Options
Ersa recommends the following accessories:
for observation of the soldering process
Article No.: 0HR610XL
Article No.: 0HR610XL
Ersa Reflow Process Camera for HR 600 XL
for observation of the soldering process
With the Reflow Process Camera (RPC) you can observe the soldering and desoldering processes in real time. The user can watch the molten solder and optimize the process parameters. The Ersa RPC increases the process reliability.
5 MP GigE color camera, 25 mm focal width; lighting: 2x LED light source. the camera is fixed on a swivel arm.
K type for the second measuring channel
Article No.: 0IR6500-37
Article No.: 0IR6500-37
AccuTC Sensor without fixture
K type for the second measuring channel
Spare sensor or second sensor for temperature control of temperature-sensitive components in the environment of the repair solder joint; sensor diameter approx. 0.5 mm.
K type, for the second measuring channel
Article No.: 0HR645
Article No.: 0HR645
AccuTC 2.0 Thermocouple
K type, for the second measuring channel
The alternative to the AccuTC for measures at Hybrid Rework Systems with big air volumes and for measures at high-mass plates; sensor diameter approx. 2 mm.
K type, for the second measuring channel
Article No.: 0IR4510-02
Article No.: 0IR4510-02
Temperature Sensor Cord
K type, for the second measuring channel
Sensor to observe the plate bottom side or for mounting at temperature-sensitive components. The sensor can be stuck with Kapton tape; sensor diameter approx. 0.3 mm.
Additional products
More accessories you will find in the Ersa Shop.
Available Versions
The following product versions or modules are available:
Article No.: 0HR600XL
HR 600 XL Hybrid Rework System
Hybrid Rework System HR 600 XL. Figure without optional available RPC camera. PC and monitor are included.
Article No.: 0HR600XL-L
HR 600 XL Hybrid Rework System with with large top side heater
Hybrid Rework System HR 600XL but with 2000 W Hybrid top side heater,
4 zones a 500 W, aktive area 150 x 80 mm