PTP®-Measuring System

Optimally designed for the soldering processes reflow convection, wave and selective soldering.

   
 
 

Description:

The PTP® electronics VP are designed as a real-time Bluetooth connection between the transmitter
module TX and receiver module RX, and has an optimum design for the vapour phase/vacuum process. Exclusive use of standard interfaces makes maximum flexibility and minimum thermal load on the process possible thanks to very low mass of the measuring electronics. The integrated battery
charge display and monitoring of the electronics internal temperature are the basis for maximum safety and interruption-free operation.

Technical highlights

  • For Reflow, Wave and Select
  • Transmitter TX, Receiver RX
  • Measuring range -50 to +1350 °C
  • 2,4 GHz real-time-data
  • 20 dbm Bluetooth® onboard
  • 8 channels + internal temperature
  • Display battery capacity 0-100%
  • 0,1|0,2|0,5|1,0|2,0 s interval
  • 10|20|50|100|200 min time
  • 2 MC with 24 Bit ADC onboard
  • Automatic offset compensation
  • Advanced CJ-Compensation
  • Charging over PC USB cable
  • WHQL certified USB Driver
  • Standard COM Ports 3 to 255
  • More than 4 houres non-stop use
  • 90% Accu power in approx. 1 h
  • li-Ionen-Accu, no memory effect
  • EN ISO 584 miniature connectors
  • IP67 industry protection
  • 2,5 dbi RX high gain antenna
  • RX 3-time LED status display

Technical Data

Temperature measurement

  • Measuring range: -150 bis 1.350 °C
  • Measuring accuracy: +/-0,5 °C
  • Resolution: 0,1 °C
  • Measuring interval: 0,1 s bis 2 s
  • Measuring channels: 8 channels for Ni/CrN

Dimensions PTP® electronic VP transmitter

  • Width: 86 mm
  • Length: 86 mm
  • Height:  23 mm

Dimensions measuring board

  • Length: 390 mm
  • Width:  300 mm
  • Height:   14 mm

Dimensions thermal protection box

  • Length: 211 mm
  • Width: 101 mm
  • Height: 30 to 33 mm

Ambient conditions measuring board

  • Umgebungstemperatur von 280 bis 300 °C
  • „„Max. Umgebungstemperatur für 20 s beträgt 350 °C
  • „„Max. Höhe mit Shuttle 25 mm
  • „„Reichweite bei Messeinsatz in Wellenlötanlagen mindestens 10 m
  • „„Reichweite Freifeld > 300 m

Downloads